| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 150 kHz |
| Number of Pins | 5 Pin |
| Supply Voltage (DC) | 60.0V (max) |
| Case/Package | TO-263-6 |
| Number of Outputs | 1 Output |
| Output Voltage | 5 V |
| Output Current | 2 A |
| Number of Positions | 5 Position |
| Quiescent Current | 10.0 mA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 150 kHz |
| Topology | Buck |
| Input Voltage (Max) | 60 V |
| Input Voltage (Min) | 4.5 V |
| Output Voltage (Min) | 5 V |
| Output Current (Max) | 2 A |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 4.5 V |
| Input Voltage | 4.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 10.16 mm |
| Size-Width | 8.64 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The LM2592HVS-5.0/NOPB is a SIMPLE SWITCHER® Power Converter Step-down Voltage Regulator provides all the active functions for a step-down (buck) switching regulator, capable of driving a 2A load with excellent line and load regulation. This regulator is available in fixed output voltages of 5V version and requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation, improved line and load specifications and a fixed-frequency oscillator. The LM259 operates at a switching frequency of 150kHz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a ensured ±4% tolerance on output voltage under all conditions of input voltage and output load conditions and ±15% on the oscillator frequency. Features include a two stage current limit for the output switch and an over-temperature shutdown for complete protection under fault conditions.
● On/off control
● Low power standby mode
● High efficiency
● Thermal shutdown and current limit protection
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
