The LM2595 series of Buck Switching Regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. Requiring a minimum number of external components, these Buck Switching Regulators are simple to use and include internal frequency compensation, and a fixed-frequency oscillator. The LM2595 series operates at a switching frequency of 150 kHz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Available in a standard 5-lead TO-220 package with several different lead bend options, and a 5-lead D2PAK surface mount package. A standard series of inductors are available from several different manufacturers optimized for use with the LM2595 series. This feature greatly simplifies the design of switch-mode power supplies.Other features include a guaranteed +/-4% tolerance on output voltage under specified input voltage and output load conditions, and +/-15% on the oscillator frequency. External shutdown is included, featuring typically 80 µA standby current. Self protection features include a two stage frequency reducing current limit for the output switch and an over temperature shutdown for complete protection under fault conditions. See LM2596 for 3.0A and LM2594 for 0.5A.
●Features | | Benefits
●---|---|---
● | | | | |
● Adjustable output voltage range, 1.2V to 37V +/-4% max over line and load
●| |
● Flexible to configure for different output voltages and applications
● Available in TO-220 and D2PAK packages
●| |
● Different mounting options
● Guaranteed 1A output load current
●| |
● High power designs
● Input voltage range up to 40V
●| |
● Can be used with several input voltage supplies (+12V, +24V, +36V)
● Excellent line and load regulation specifications
●| |
● Provides a stable power supply
● 150 kHz fixed frequency internal oscillator
●| |
● No external component required to set frequency
● TTL shutdown capability
●| |
● Easy to implement low power modes
● Low power standby mode, Iq typically 80 µA
●| |
● Power saving mode
● Uses readily available standard inductors
●| |
● Quick and easy implementation
● Thermal shutdown and current limit
●| |
● Additional protection against faults
