| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 1.8 MHz |
| Number of Pins | 5 Pin |
| Supply Voltage (DC) | 14.0V (max) |
| Case/Package | SOT-23-5 |
| Number of Outputs | 1 Output |
| Output Voltage | -36.0 V, -1.23 V (min) |
| Output Current | 1.2 A |
| Number of Positions | 5 Position |
| Drain to Source Resistance (on) (Rds) | 0.5 Ω |
| Quiescent Current | 1.80 mA |
| Number of Regulated Outputs | 1 Output |
| Output Power | 2.00 W |
| Switching Frequency | 1.4 MHz |
| Switching Current | 1.2 A |
| Input Voltage (Max) | 14 V |
| Input Voltage (Min) | 2.7 V |
| Output Current (Max) | 1 A |
| Input Power (Max) | 2 W |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 2.7 V |
| Supply Voltage (Max) | 14 V |
| Supply Voltage (Min) | 2.7 V |
| Input Voltage | 2.7V ~ 14V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 2.92 mm |
| Size-Width | 1.6 mm |
| Size-Height | 1.02 mm |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
The LM2611AMF/NOPB is a Cuk Converter operates from a 2.7 to 14V supply, it is capable of producing a regulated negative output voltage of up to -(36-VIN(MAX)). The LM2611 utilizes an input and output inductor, which enables low voltage ripple and RMS current on both the input and the output. With a switching frequency of 1.4MHz, the inductors and output capacitor can be physically small and low cost. High efficiency is achieved through the use of a low RDS(ON)FET. The converter features a shutdown pin, which can be activated when the part is not needed to lower the Iq and save battery life. A negative feedback (NFB) pin provides a simple method of setting the output voltage, using just two resistors. Cycle-by-cycle current limiting and internal compensation further simplify the use.
● Low RDS (ON) DMOS FET
● Better regulation than a charge pump
● Uses tiny capacitors and inductors
● <1µA Low shutdown current
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
Conv DC-DC 2.7V to 14V Inv/Step Down Single-Out -1.23V to -36V 2W 5Pin SOT-23 T/R
TI
Conv DC-DC 2.7V to 14V Inv/Step Down Single-Out -1.23V to -36V 2W 5Pin SOT-23 T/R
TI
Conv DC-DC 2.7V to 14V Inv/Step Down Single-Out -1.23V to -36V 2W 5Pin SOT-23 T/R
TI
Conv DC-DC 2.7V to 14V Inv/Step Down Single-Out -1.23V to -36V 2W 5Pin SOT-23 T/R
TI
Conv DC-DC 2.7V to 14V Inv/Step Down Single-Out -1.23V to -36V 2W 5Pin SOT-23 T/R
TI
TEXAS INSTRUMENTS LM2611EVAL Evaluation Board, 300mA Buck/Boost Converter, 1.4MHz Switching Frequency, Better Regulation
TI
Conv DC-DC 2.7V to 14V Inv/Step Down Single-Out -1.23V to -36V 2W 5Pin SOT-23 T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
