The LM2672N-ADJ/NOPB is a SIMPLE SWITCHER® low component count Step-down Regulator provides all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load current with excellent line and load regulation. Requiring a minimum number of external components, this regulator is simple to use and include patented internal frequency compensation (patent nos. 5,382,918 and 5,514,947), fixed frequency oscillator, external shutdown, soft-start and frequency synchronization. The LM2672 series operates at a switching frequency of 260kHz, thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Because of its very high efficiency (>90%), the copper traces on the printed circuit board are the only heat sinking needed. A family of standard inductor for use with the LM2672 is available from several different manufacturers.
● Computer design software version 6.0
● Simple and easy to design
● Requires only 5 external components
● Uses readily available standard inductors
● TTL shutdown capability and low power standby mode
● Soft-start and frequency synchronization
● Thermal shutdown and current limit protection
● Up to 96% efficiency
● ±1.5% Maximum output voltage tolerance over line and load conditions
● 0.25R DMOS output switch
● Green product and no Sb/Br