TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 3 Pin |
Supply Voltage (DC) | 26.0V (max) |
Case/Package | TO-263-4 |
Number of Outputs | 1 Output |
Input Voltage (DC) | 26.0V (max) |
Output Voltage | 12 V |
Output Current | 500 mA |
Number of Positions | 3 Position |
Quiescent Current | 2 mA |
Output Capacitor Type | Ceramic |
voltage rating | 500 mV |
Number of Regulated Outputs | 1 Output |
Input Voltage (Max) | 26 V |
Input Voltage (Min) | 0 V |
Output Current (Max) | 0.5 A |
Operating Temperature (Max) | 125 ℃ |
Operating Temperature (Min) | -40 ℃ |
Accuracy | 5 % |
Input Voltage | ≤26 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Each |
Size-Length | 10.16 mm |
Size-Width | 8.64 mm |
Size-Height | 4.57 mm |
Operating Temperature | -40℃ ~ 125℃ |
The LM2937ES-12/NOPB is a 12V low dropout Positive Voltage Regulator capable of supplying up to 500mA of load current. The use of a PNP power transistor provides a low dropout voltage characteristic. With a load current of 500mA the minimum input to output voltage differential required for the output to remain in regulation is typically 0.5V. Special circuitry has been incorporated to minimize the quiescent current to typically only 10mA with a full 500mA load current when the input to output voltage differential is greater than 3V. The LM2937 requires an output bypass capacitor for stability. As with most low dropout regulator, the ESR of this capacitor remains a critical design parameter, but this regulator includes special compensation circuitry that relaxes ESR requirements. The device is stable for all ESR below 3R. This allows the use of low ESR chip capacitors.
● Output trimmed for 5% tolerance under all operating conditions
● Internal short-circuit and thermal overload protection
● Reverse battery protection
● 60V Input transient protection
● Mirror image insertion protection
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
TEXAS INSTRUMENTS LM2937ES-12 Fixed LDO Voltage Regulator, 0V to 26V, 500mV Dropout, 12Vout, 500mAout, TO-263-3
National Semiconductor
LDO Regulator Pos 12V 0.5A 4Pin(3+Tab) TO-263 Rail
National
500mA Low Dropout Regulator
TI
TEXAS INSTRUMENTS LM2937ES-12/NOPB Fixed LDO Voltage Regulator, 0V to 26V, 500mV Dropout, 12Vout, 500mAout, TO-263-3
National Semiconductor
LDO Regulator Pos 12V 0.5A 4Pin(3+Tab) TO-263 Rail
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.