| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Case/Package | PDIP-8 |
| Output Current | 20 mA |
| Supply Current | 5 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 0.5 W |
| Common Mode Rejection Ratio | 70 dB |
| Input Offset Drift | 6.00 µV/K |
| Bandwidth | 15 MHz |
| Slew Rate | 70.0 V/μs |
| Gain Bandwidth Product | 15 MHz |
| Input Offset Voltage | 4 mV |
| Input Bias Current | 150 nA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| 3dB Bandwidth | 15 MHz |
| Gain Bandwidth | 15 MHz |
| Power Dissipation (Max) | 500 mW |
| Minimum CMRR Range | 70 dB |
| Supply Voltage | 10V ~ 40V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 9.27 mm |
| Size-Width | 6.35 mm |
| Size-Height | 3.3 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The LM318N/NOPB is a precision high speed Operational Amplifier designed for applications requiring wide bandwidth and high slew rate. This amplifier features a factor of ten increases in speed over general purpose devices without sacrificing DC performance. The LM118 series has internal unity gain frequency compensation. This considerably simplifies its application since no external components are necessary for operation. However, unlike most internally compensated amplifiers, external frequency compensation may be added for optimum performance. For inverting applications, feed forward compensation will boost the slew rate to over 150V/µs and almost double the bandwidth. Overcompensation can be used with the amplifier for greater stability when maximum bandwidth is not needed. Further, a single capacitor can be added to reduce the 0.1% settling time to under 1µs. The high speed and fast settling time of these op amps make them useful in A/D converters, oscillators and hold circuits.
● 250nA Maximum bias current
● Internal frequency compensation
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
Operational Amplifier, Single, 1 Amplifier, 15MHz, 70V/µs, ± 5V to ± 20V, DIP, 8Pins
TI
Operational Amplifier, Single, 1 Amplifier, 15MHz, 70V/µs, 10V to 40V, DIP, 8Pins
TI
TEXAS INSTRUMENTS LM318D Operational Amplifier, Single, 1 Amplifier, 15MHz, 50V/µs, ± 5V to ± 20V, SOIC, 8Pins
TI
OP Amp Single GP 20V 8Pin SOIC Rail
TI
IC OPAMP GP 15MHz SGL FAST 8SOIC
TI
TEXAS INSTRUMENTS LM318N Operational Amplifier, Single, 1 Amplifier, 15MHz, 70V/µs, 10V to 40V, DIP, 8Pins
National Semiconductor
IC, OP-AMP, 15MHz, 70V/µs, DIP-8
TI
Operational Amplifier, Single, 1 Amplifier, 15MHz, 70V/µs, ± 5V to ± 20V, SOIC, 8Pins
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
