| TYPE | DESCRIPTION |
|---|
| Number of Outputs | 1 Output |
| Output Voltage | 11.4 V |
| Output Current | 190 mA |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 3.5 V |
| Input Voltage | 3.3V ~ 5.5V |
This evaluation board showcases the LM3410X as a boost LED driver. It is designed to drive four, on-board LEDs (VOUT = 11.4V) in series at an average LED current (ILED) of 190mA. The circuit can accept an input voltage of 3.3V-5.5V. The switching frequency of the LM3410X converter is 1.6MHz allowing the use of small surface mount inductors and chip capacitors. This evaluation board also features the PWM capability of the LM3410 by enabling the user to apply a periodic pulse signal to the DIM terminal of varying duty cycle. This is a 2-layer board using the bottom layer as a ground plane. The above restrictions for the input voltage are valid only for this evaluation board.
TI
525kHz/1.6MHz, Constant Current Boost and SEPIC LED Driver with Internal Compensation
TI
TEXAS INSTRUMENTS LM3410XMF/NOPB Led Driver, 1 Output, Boost, Constant Current, 2.7V-5.5V in, 1.6MHz switch, 24V/1.5A out, SOT-23-5
TI
525kHz/1.6MHz, Constant Current Boost and SEPIC LED Driver with Internal Compensation 6-WSON -40℃ to 125℃
TI
LED Driver 5Segment 3.3V/5V 5Pin SOT-23 T/R
TI
LED Driver 5Segment 3.3V/5V 5Pin SOT-23 T/R
TI
TEXAS INSTRUMENTS LM3410XQMF/NOPB Led Driver, Boost, SEPIC, PWM Dimming, 2.7V-5.5V in, 1.6MHz switch, 24V/2.8A out, SOT-23-5
TI
LED Driver 5Segment 3.3V/5V 5Pin SOT-23 T/R
TI
TEXAS INSTRUMENTS LM3410YMF/NOPB Led Driver, 1 Output, Boost, Constant Current, 2.7V-5.5V in, 525kHz switch, 24V/1.5A out, SOT-23-5
TI
LED Lighting Drivers 525kHz/1.6MHz, Constant Current Boost and SEPIC LED Driver with Internal Compensation 5-SOT-23 -40℃ to 125℃
TI
LED Driver 5Segment 3.3V/5V 8Pin HVSSOP EP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
