TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Frequency | 1.27 MHz |
Number of Pins | 10 Pin |
Case/Package | WSON-10 |
Number of Outputs | 2 Output |
Output Voltage | 21 V |
Supply Current | 440 µA |
Quiescent Current | 900 µA |
Number of Regulated Outputs | 2 Output |
Switching Frequency | 1.25 MHz |
Thermal Shutdown | Yes |
Topology | Boost |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Size-Length | 3 mm |
Size-Width | 3 mm |
Size-Height | 0.8 mm |
Operating Temperature | -40℃ ~ 85℃ (TA) |
The LM3509 current mode boost converter offers two separate outputs. The first output (MAIN) is a constant current sink for driving series white LED’s. The second output (SUB/FB) is configurable as a constant current sink for series white LED bias, or as a feedback pin to set a constant output voltage for powering OLED panels.
●All trademarks are the property of their respective owners.
●When configured as a dual output white LED bias supply, the LM3509 adaptively regulates the supply voltage of the LED strings to maximize efficiency and insure the current sinks remain in regulation. The maximum current per output is set via a single external low power resistor. An I2C compatible interface allows for independent adjustment of the LED current in either output from 0 to max current in 32 exponential steps. When configured as a white LED + OLED bias supply the LM3509 can independently and simultaneously drive a string of up to 5 white LED’s and deliver a constant output voltage of up to 21V for OLED panels.
●Output over-voltage protection shuts down the device if VOUT rises above 21V allowing for the use of small sized low voltage output capacitors. The LM3509 is offered in a small 10-pin thermally- enhanced WSON package and operates over the -40°C to +85°C temperature range.
TI
High Efficiency Boost for White LED"s and/or OLED Displays with Dual Current Sinks5
TI
TEXAS INSTRUMENTS LM3509SD/NOPB White LED Driver, Boost (Step Up), 2.7-5.5V input, 2Outputs, 1.27MHz, 21V/30mA out, LLP-10
TI
TEXAS INSTRUMENTS LM3509SDE/NOPB White LED Driver, Boost (Step Up), 2.7-5.5V input, 2Outputs, 1.27MHz, 21V/30mA out, LLP-10
TI
LED Driver 10Segment 3.3V/5V 10Pin WSON EP T/R
TI
Evaluation Board, Current Mode Boost Converter, LED Driver, 2Outputs, LM3509
TI
LED DRVR 10Segment 3.3V/5V 10Pin WSON EP T/R
National Semiconductor
IC LED DRVR WHT BCKLGT 9MICROSMD
National Semiconductor
High Efficiency Boost For White Led S And/or Oled Displays With Dual Current Sinks And I2c Compatible Brightness Control
National Semiconductor
National Semiconductor (TI) Power Management IC Development Tools LM3509SD EVAL BOARD
National Semiconductor
IC LED DRVR WHT BCKLGT 9USMD
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.