| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 32.0V (max) |
| Case/Package | SOIC-8 |
| Output Current | 60 mA |
| Supply Current | 700 µA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 500 mW |
| Common Mode Rejection Ratio | 70 dB |
| Bandwidth | 1.1 MHz |
| Slew Rate | 600 mV/μs |
| Gain Bandwidth Product | 1.1 MHz |
| Input Offset Voltage | 3 mV |
| Input Bias Current | 20 nA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Power Dissipation (Max) | 500 mW |
| Minimum CMRR Range | 70 dB |
| Supply Voltage | 3V ~ 30V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 4.9 mm |
| Size-Width | 3.9 mm |
| Size-Height | 1.25 mm |
| Operating Temperature | 0℃ ~ 70℃ |
These circuits consist of two independent, high-gain, internally frequency-compensated op-amps, specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage. These circuits can be directly supplied with the standard +5 V, which is used in logic systems and will easily provide the required interface electronics with no additional power supply.
● Large DC voltage gain of 100 dB
● Input common-mode voltage range includes negative rails
● Differential input voltage range equal to the power supply voltage
ST Microelectronics
23 Pages / 1.01 MByte
ST Microelectronics
3 Pages / 0.04 MByte
ON Semiconductor
Single Supply Dual Operational Amplifiers
National Semiconductor
Low Power Dual Operational Amplifier
Motorola
Amplifiers and Comparators
Harris
DUAL, 1MHz OPERATIONAL AMPLIFIERS FOR COMMERCIAL INDUSTRIAL, AND MILITARY APPLICATION
Estek Electronics
Dual Operational Amplifiers
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
