| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Operating Voltage | 3V ~ 32V |
| Case/Package | DIP-8 |
| Output Current | 30mA @15V |
| Supply Current | 1 mA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Drift | 7.00 µV/K |
| Bandwidth | 700 kHz |
| Slew Rate | 300 mV/μs |
| Gain Bandwidth Product | 700 kHz |
| Input Offset Voltage | 3 mV |
| Input Bias Current | 20 nA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Gain Bandwidth | 0.7 MHz |
| Minimum CMRR Range | 65 dB |
| Supply Voltage | 3V ~ 32V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 9.81 mm |
| Size-Width | 6.35 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | 0℃ ~ 70℃ |
These devices consist of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.
● Wide supply voltage ranges
● Low supply-current drain independent of supply voltage
● Common-mode input voltage range includes ground, allowing direct sensing near ground
● Low input bias and offset parameters
● Internal frequency compensation
ON Semiconductor
Single Supply Dual Operational Amplifiers
National Semiconductor
Low Power Dual Operational Amplifier
Motorola
Amplifiers and Comparators
Harris
DUAL, 1MHz OPERATIONAL AMPLIFIERS FOR COMMERCIAL INDUSTRIAL, AND MILITARY APPLICATION
Estek Electronics
Dual Operational Amplifiers
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
