General Description
●The LM3658 is a single chip charger IC designed for hand held applications. It can safely charge and maintain a single cell Li-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic. With both power sources present, the AC power source has priority. Charge current is programmed through an external resistor when operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USB power, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V.
●Features
●Integrated power FETs with thermal regulation
●Charges from either an AC wall adapter or USB power source with automatic source selection
●50 mA to 1000 mA charge currents using AC wall adapter
●Pin-selectable USB charge currents of 100 mA or 500 mA
●Continuous battery temperature monitoring
●Built-in multiple safety timers
●Charge status indication
●Continuous over-current and temperature protection
●Near-depleted battery pre-conditioning
●Sleep mode with ultra low quiescent current
●On-board Kelvin-sensing achieves ±0.35% termination accuracy
●Maintenance mode with automatic recharge
●Thermally enhanced 3 mm x 3 mm LLP package
●Applications
●Smartphones
●Digital still cameras
●PDAs
●Hard Drive and flash-based MP3 players
●USB-powered devices
