| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 12 Pin |
| Case/Package | WSON-12 |
| Number of Outputs | 1 Output |
| Output Voltage | 2.8V ~ 3.3V |
| Output Current | 1 A |
| Number of Positions | 12 Position |
| Quiescent Current | 45.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 2.5 MHz |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 2.5 V |
| Output Voltage (Max) | 3.3 V |
| Output Voltage (Min) | 2.8 V |
| Output Current (Max) | 1 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 2.5 V |
| Input Voltage | 2.5V ~ 5.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3 mm |
| Size-Width | 3 mm |
| Size-Height | 0.8 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The LM3668SD-2833/NOPB is a high-efficiency dual-mode single inductor buck-boost DC-to-DC Converter optimized for powering low voltage circuits from a Li-ion battery and input voltage rails between 2.5 and 5.5V. It has the capability to support up to 1A output current over the output voltage range. The LM3668 regulates the output voltage over the complete input voltage range by automatically switching between buck or boost modes depending on the input voltage. The LM3668 has 2 N-channel MOSFETS and 2 P-channel MOSFETS arranged in a topology that provides continuous operation through the buck and boost operating modes. There is a MODE pin that allows the user to choose between an intelligent automatic PFM-PWM mode operation and forced PWM operation. During PWM mode, a fixed-frequency 2.2MHz (typical) is used. PWM mode drives load up to 1A. Hysteretic PFM mode extends the battery life through reduction of the quiescent current to 45µA (typical) at light loads during system standby.
● Internal synchronous rectification provides high efficiency
● Current overload and thermal shutdown protection
● Internal soft-start - 600µs maximum startup time after VIN settled
● 0.01µA Typical shutdown current
● Green product and no Sb/Br
TI
Conv DC-DC 2.5V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 2.8V/3.3V 1A 12Pin WSON EP T/R
National Semiconductor
1A, High Efficiency Dual Mode Single Inductor Buck-Boost DC-DC Converter
TI
Conv DC-DC 2.5V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 2.8V/3.3V 1A 12Pin WSON EP T/R
TI
TEXAS INSTRUMENTS LM3668SD-2833EV/NOPB Evaluation Board, Buck/Boost DC-DC Converter, Automatic Pym-PWM Mode or Forced PWM Mode
National Semiconductor
Conv DC-DC Single Non-Inv/Inv/Step Up/Step Down 2.5V to 5.5V 12Pin LLP EP T/R
National Semiconductor
BOARD EVALUATION LM3668SD-2833
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
