| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 5 Pin |
| Capacitance Tolerance | ±0.05 % |
| Case/Package | SOT-23-5 |
| Input Voltage (DC) | 3.70V ~ 5.50V |
| Output Voltage | 3.3 V |
| Output Current | 20 mA |
| Supply Current | 100 µA |
| Number of Channels | 1 Channel |
| Number of Positions | 5 Position |
| Quiescent Current | 60.0 µA |
| Input Voltage (Max) | 6 V |
| Output Voltage (Max) | 3.3 V |
| Output Voltage (Min) | 3.3 V |
| Output Current (Max) | 20 mA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Accuracy | ±0.05 % |
| Input Voltage | 3.7V ~ 5.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
| Temperature Coefficient | ±20 ppm/℃ |
The LM4132 series precision Voltage Reference performs comparable to the best laser-trimmed bipolar references, but in CMOS technology. The key to this breakthrough is the use of EEPROM registers for correction of curvature, temperature coefficient (temperature coefficient) and accuracy on a CMOS band-gap architecture allowing package-level programming to overcome assembly shift. The shifts in voltage accuracy and temperature coefficient during assembly of die into plastic packages limit the accuracy of references trimmed with laser techniques. Unlike other LDO references, the LM4132 can deliver up to 20mA and does not require an output capacitor or buffer amplifier. series references provide lower power consumption than shunt references, because they do not have to idle the maximum possible load current under no-load conditions.
● Stable with low ESR ceramic capacitors
● Enable pin allowing a 3µA shutdown mode
● VIN range of VREF +400mV to 5.5V at 10mA
● 60µA Low supply current
● Green product and no Sb/Br
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
