| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 500 kHz |
| Number of Pins | 16 Pin |
| Case/Package | HTSSOP-16 |
| Number of Outputs | 1 Output |
| Output Voltage | 1.23V ~ 70V |
| Output Current | 1.5 A |
| Number of Positions | 16 Position |
| Quiescent Current | 1.00 mA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 485 kHz |
| Topology | Buck |
| Input Voltage (Max) | 75 V |
| Input Voltage (Min) | 6 V |
| Output Voltage (Max) | 70 V |
| Output Voltage (Min) | 1.225 V |
| Output Current (Max) | 1.5 A |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 6 V |
| Input Voltage | 6V ~ 75V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Operating Temperature | -40℃ ~ 125℃ |
The LM5575MH is a SIMPLE SWITCHER® 1.5A Wide Vin Step-down Regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6 to 75V, the LM5575 delivers 1.5A of continuous output current with an integrated 330mR N-channel MOSFET. The regulator utilizes an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 500kHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple IC"s from this family to self-synchronize or to synchronize to an external clock. The LM5575 ensures robustness with cycle-by-cycle current limit, short-circuit protection, thermal shut-down and remote shut-down.
● Master or slave frequency synchronization
● Adjustable soft-start
● Emulated current mode control architecture
● Wide bandwidth error amplifier
● Built-in protection
● 1.5% Feedback reference accuracy
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
6V to 75V, 1.5A Wide Vin Step-Down Regulator
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A 16Pin HTSSOP EP T/R
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A 16Pin HTSSOP EP Rail
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A Automotive 16Pin HTSSOP EP Tube
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A 16Pin HTSSOP EP Tube
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A Automotive 16Pin HTSSOP EP T/R
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A 16Pin HTSSOP EP T/R
TI
LM5575 DC to DC Converter and Switching Regulator Chip 5VDC Output Evaluation Board
TI
Conv DC-DC 6V to 75V Step Down Single-Out 1.23V to 70V 1.5A Automotive 16Pin HTSSOP EP Tube
TI
Conv DC-DC Single Step Down 6V to 75V 16Pin HTSSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
