| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 14 Pin |
| Case/Package | SOIC-14 |
| Output Current | 25mA @5V |
| Supply Current | 210 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 14 Position |
| Common Mode Rejection Ratio | 75 dB |
| Input Offset Drift | 15.0 µV/K |
| Bandwidth | 800 kHz |
| Slew Rate | 700 mV/μs |
| Gain Bandwidth Product | 800 kHz |
| Input Offset Voltage | 1.5 mV |
| Input Bias Current | 25 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 800 kHz |
| Minimum CMRR Range | 75 dB |
| Supply Voltage | 4V ~ 36V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 8.75 mm |
| Size-Width | 4 mm |
| Size-Height | 1.5 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The LM611 consists of a single-supply op-amp and a programmable voltage reference in one space saving 8-pin package. The op-amp out-performs most single-supply op-amps by providing higher speed and bandwidth along with low supply current. This device was specifically designed to lower cost and board space requirements in transducer, test, measurement and data acquisition systems.
●Combining a stable voltage reference with a wide output swing op-amp makes the LM611 ideal for single supply transducers, signal conditioning and bridge driving where large common-mode signals are common. The voltage reference consists of a reliable band-gap design that maintains low dynamic output impedance (1Ω typical), excellent initial tolerance (0.6%), and the ability to be programmed from 1.2V to 6.3V via two external resistors. The voltage reference is very stable even when driving large capacitive loads, as are commonly encountered in CMOS data acquisition systems.
●As a member of TI"s Super-Block family, the LM611 is a space-saving monolithic alternative to a multi-chip solution, offering a high level of integration without sacrificing performance.
National Semiconductor
Operational Amplifier and Adjustable Reference
TI
Operational Amplifier and Adjustable Reference
TI
OP Amp Single GP 32V 14Pin SOIC T/R
National Semiconductor
IC OPAMP GP 800kHz 14SOIC
TI
Operational Amplifier, Dual, 2 Amplifier, 800kHz, 0.7V/µs, 4V to 36V, SOIC, 14Pins
TI
Operational Amplifiers - Op Amps Auto 2.7V SOT-23 or TO-92 Temp Sensor
TI
Operational Amplifier and Adjustable Reference 14-SOIC -40℃ to 85℃
TI
OP Amp Single GP 32V 14Pin SOIC T/R
National Semiconductor
IC OPAMP GP 800kHz 14SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
