| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Case/Package | SOIC-8 |
| Output Current | ≤25 mA |
| Supply Current | 390 µA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 60 dB |
| Input Offset Drift | 5.00 µV/K |
| Bandwidth | 10 MHz |
| Slew Rate | 14.0 V/μs |
| Gain Bandwidth Product | 10 MHz |
| Input Offset Voltage | 1.7 mV |
| Input Bias Current | 0.11μA @5V |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 10 MHz |
| Minimum CMRR Range | 60 dB |
| Supply Voltage | 2.7V ~ 24V |
| Supply Voltage (Max) | 24 V |
| Supply Voltage (Min) | 1.8 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Length | 4.9 mm |
| Size-Width | 3.9 mm |
| Size-Height | 1.45 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The LM6132BIM/NOPB is a dual low power Operational Amplifier with rail-to-rail input and output. It provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360µA/amplifier supply current, the 10MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. It can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. It can also drive large capacitive loads without oscillating. Operating on supplies from 2.7V to over 24V, it is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.
● -0.25 to 5.25V Rail-to-rail input CMVR
● 0.01 to 4.99V Rail-to-rail output swing
● 360µA/amplifier Low supply current
● 100dB CMRR
● 100dB with RL=10k Gain
● 82dB PSRR
● Green product and no Sb/Br
TI
Dual Low Power 10MHz Rail-to-Rail I/O Operational Amplifier
National Semiconductor
Low Power 10MHz Rail-to-Rail I/O Operational Amplifiers
TI
TEXAS INSTRUMENTS LM6132AIM/NOPB Operational Amplifier, Dual, 2 Amplifier, 10MHz, 14V/µs, 2.7V to 24V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS LM6132BIMX/NOPB Operational Amplifier, Rail to Rail, 2 Amplifier, 10MHz, 14V/µs, 1.8V to 24V, SOIC, 8Pins
TI
Operational Amplifier, Dual, 2 Amplifier, 10MHz, 14V/µs, 2.7V to 24V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS LM6132BIN/NOPB Operational Amplifier, 2 Amplifier, 10MHz, 14V/µs, 1.8V to 24V, DIP, 8Pins
TI
TEXAS INSTRUMENTS LM6132AIMX/NOPB Operational Amplifier, Dual, 2 Amplifier, 10MHz, 14V/µs, 1.8V to 24V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS LM6132BIM Operational Amplifier, Dual, 2 Amplifier, 10MHz, 14V/µs, 1.8V to 24V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS LM6132AIM Operational Amplifier, Dual, 2 Amplifier, 10MHz, 14V/µs, 2.7V to 24V, SOIC, 8Pins
National Semiconductor
OP Amp Dual GP R-R I/O 24V 8Pin SOIC N Rail
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
