The LM7321MF is a rail-to-rail input-output single channel high output current and unlimited capacitive load ±15V Operational Amplifier with wide operating voltages and high-output currents. The LM732 family is efficient, achieving 18V/µs slew rate and 20MHz unity gain bandwidth while requiring only 1mA of supply current per op-amp. This device is designed to drive unlimited capacitive loads without oscillations. All the parts of the op-amp is tested at -40, 125 and 25°C with modern automatic test equipment. Greater than rail-to-rail input common-mode voltage range with 50dB of common-mode rejection across this wide voltage range, allows both high-side and low-side sensing. Most device parameters are insensitive to power supply voltage and this makes the parts easier to use where supply voltage may vary. This amplifier has true rail-to-rail output and can supply a respectable amount of current with minimal head-room from either rail (300mV) at low distortion (0.05% THD+Noise).
● Capacitive load tolerance unlimited
● Input common-mode voltage 0.3V beyond rails
● 15nV/√Hz Input voltage noise
● 1.3pA/√Hz Input current noise
● 1.1mA Supply current/channel
● Automotive grade product that is AEC-Q100 grade 1 qualified
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.