The LM75AIM is an industry-standard Digital Temperature Sensor with an integrated sigma-delta analogue-to-digital converter (ADC) and I²C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from -25 to 100°C and ±3°C over -55 to 125°C. It operates with a single supply from 2.7 to 5.5V. Communication is accomplished over a 2-wire interface which operates up to 400kHz. It has three address pins, allowing up to eight LM75AIM devices to operate on the same 2-wire bus. It has a dedicated over-temperature output (OS) with programmable limit and hysteresis. This output has programmable fault tolerance, which lets the user to define the number of consecutive error conditions that must occur before OS is activated. The wide temperature and supply range and I²C interface.
● No external components required
● Shutdown mode to minimize power consumption
● Up to eight LM75As can be connected to a single bus
● Power up defaults permit stand-alone operation as thermostat
● 280µA Typical operating and 4µA typical shutdown current
● Green product and no Sb/Br
●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
