General Description
●The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package (8-Bump micro SMD) using National’s micro SMD package technology. Both allow for single supply operation and are guaranteed for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its guaranteed 2.7V operation.
●Features
●(Typical Unless Otherwise Noted)
●LMC6035 in micro SMD Package
●Guaranteed 2.7V, 3V, 5V and 15V Performance
●Specified for 2 kΩand 600ΩLoads
●Wide Operating Range: 2.0V to 15.5V
●Ultra Low Input Current: 20fA
●Rail-to-Rail Output Swing
● @600Ω: 200mV from either rail at 2.7V
● @100kΩ: 5mV from either rail at 2.7V
●High Voltage Gain: 126dB
●Wide Input Common-Mode Voltage Range
● -0.1V to 2.3V at VS= 2.7V
●Low Distortion: 0.01% at 10kHz
●LMC6035 Dual LMC6036 Quad
●See AN-1112 for micro SMD considerations
●Applications
●Filters
●High Impedance Buffer or Preamplifier
●Battery Powered Electronics
●Medical Instrumentation
