The LMV796/LMV796Q (Single) and the LMV797 (Dual) low noise, CMOS input operational amplifiers offer a low input voltage noise density of 5.8 nV/√Hz while consuming only 1.15 mA (LMV796/LMV796Q) of quiescent current. The LMV796/LMV796Q and LMV797 are unity gain stable op amps and have gain bandwidth of 17 MHz. The LMV796/LMV796Q/ LMV797 have a supply voltage range of 1.8V to 5.5V and can operate from a single supply. The LMV796/LMV796Q/LMV797 each feature a rail-to-rail output stage capable of driving a 600Ω load and sourcing as much as 60 mA of current.
●The LMV796/LMV796Q family provides optimal performance in low voltage and low noise systems. A CMOS input stage, with typical input bias currents in the range of a few femtoAmperes, and an input common mode voltage range, which includes ground, make the LMV796/LMV796Q and the LMV797 ideal for low power sensor applications.
●The LMV796/LMV796Q/LMV797 are manufactured using TI’s advanced VIP50 process. The LMV796/ LMV796Q are offered in 5–pin SOT-23 package. The LMV797 is offered in 8–pin VSSOP package.
●(Typical 5V Supply, Unless Otherwise Noted)
● Input Referred Voltage Noise 5.8 nV/√Hz
● Input Bias Current 100 fA
● Unity Gain Bandwidth 17 MHz
● Supply Current per Channel
● LMV796/LMV796Q 1.15 mA
● LMV797 1.30 mA
● Rail-to-Rail Output Swing
● @ 10 kΩ Load 25 mV from Rail
● @ 2 kΩ Load 45 mV from Rail
● Guaranteed 2.5V and 5.0V Performance
● Total Harmonic Distortion 0.01% @ 1kHz, 600Ω
● Temperature Range −40°C to 125°C
● LMV796Q is an Automotive Grade Product that is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
●All trademarks are the property of their respective owners.
