The LMV951 amplifier is capable of operating at supply voltages from 0.9 V to 3 V with specified specs at 1-V and 1.8-V single supply.
●The input common-mode range extends to both power supply rails without the offset transition zone and input bias current reversal inherent to most rail-to-rail input amplifiers.
●Contrary to a conventional rail-to-rail output amplifier, the LMV951 has a buffered output stage, providing an open-loop gain which is relatively unaffected by resistive output loading. At 1-V supply voltage, the LMV951 is able to source and sink in excess of
●35 mA and offers a gain bandwidth product of 2.7 MHz.
●In shutdown mode, the LMV951 consumes less than 50 nA of supply current.
● (Typical 1-V Supply, Unless Otherwise Noted)
● Ensured 1-V, 380-µA Single-Supply Operation
● Shutdown to 50-nA Supply Current
● Wide 2.7-MHz Bandwidth
● Rail-to-Rail Input With Zero Crossover
● No Input IBIAS Current Reversal Over VCM Range
● 1000-pF Output Drive Capability
● High-Output Drive Capability
● Sink Current: 35 mA
● Source Current: 45 mA
● Rail-to-Rail Buffered Output
● At 600-Ω Load, 32 mV from Either Rail
● At 2-kΩ Load, 12 mV from Either Rail
● Temperature Range 40°C to 125°C
