LP2951D Datasheet PDF - TI

The LP2951D is a single output LDO 100mA adjustable wide Vin range RESET flag bipolar low-dropout Voltage Regulator that can accommodate a wide input supply-voltage range of up to 30V. The easy-to-use, 8-pin LP2951 is able to output either a fixed or adjustable output from the same device. By tying the OUTPUT and SENSE pins together and the FEEDBACK and VTAP pins together, the LP2951 outputs a fixed 5, 3.3 or 3V (depending on the version). Alternatively, by leaving the SENSE and VTAP pins open and connecting FEEDBACK to an external resistor divider, the output can be set to any value between 1.235 to 30V.

● Shutdown capability

● 75µA Typical low quiescent current

● 0.03% Typical tight line regulation

● 0.04% Typical tight load regulation

● Current and thermal-limiting features

● Low-voltage error signal on falling output

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.