| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 6.00V (max) |
| Current Rating | 300 A |
| Case/Package | VSSOP-8 |
| Number of Outputs | 1 Output |
| Output Voltage | 1.8 V |
| Output Current | 300 mA |
| Number of Positions | 8 Position |
| Quiescent Current | 0.09 mA |
| Output Capacitor Type | Ceramic |
| voltage rating | 120 mV |
| Number of Regulated Outputs | 1 Output |
| Input Voltage (Max) | 6 V |
| Input Voltage (Min) | 2.5 V |
| Output Voltage (Min) | 1.8 V |
| Output Current (Max) | 0.3 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Accuracy | ±2 % |
| Supply Voltage (Max) | 6 V |
| Supply Voltage (Min) | 2.5 V |
| Input Voltage | 2.5V ~ 6V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3 mm |
| Size-Width | 3 mm |
| Size-Height | 0.86 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The LP3982IMM-1.8/NOPB is a 1.8V fixed output low-dropout (LDO) CMOS Linear Regulator deliver 300mA of output current. The device suits battery-powered applications because of its shutdown mode, low quiescent current and LDO voltage. The low-dropout (LDO) voltage allows for more utilization of a battery"s available energy by operating closer to its end-of-life voltage. The LP3982 device"s PMOS output transistor consumes relatively no drive current compared to PNP LDO regulators. This PMOS regulator is stable with small ceramic capacitive loads (2.2µF typical). These devices also include regulation fault detection, a bandgap voltage reference, constant current limiting and thermal-overload protection.
● 90µA Quiescent current
● 1nA Shutdown mode
● 60dB PSRR
● 120µs Turn-ON time
● 37µVrms Output voltage noise (10Hz to 100kHz)
● Overtemperature and overcurrent protection
● ±2% Output voltage tolerance
● Green product and no Sb/Br
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
