Overview
●The LPC1112LVFHN24 is an ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures. The LPC1112LVFHN24 operates at CPU frequencies of up to 50 MHz. The peripherals of the LPC1112LVFHN24 include 16 kB of flash memory, 2 kB of SRAM data memory, a Fast-mode Plus I²C-bus interface, one SPI interface, one UART, four general purpose counter/timers, an 8-bit ADC, and 20 general purpose I/O pins.
●MoreLess
●## Features
● ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.
● ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC)
● Serial Wire Debug
● System tick timer
● 16 kB on-chip flash programming memory
● 2 kB SRAM
● In-System Programming (ISP) and In-Application Programming (IAP)
● Up to 20 General Purpose I/O (GPIO) pins
● GPIO pins can be used as edge and level sensitive interrupt sources
● High-current sink drivers (20 mA) on two I²C-bus pins in Fast-mode Plus
● Four general purpose counter/timers
● Programmable windowed WDT
● 8-bit ADC with input multiplexing among 6 pins
● UART with fractional baud rate generation and internal FIFO
● One SPI controller with SSP features
● I²C-bus interface supporting full I²C-bus specification and Fast-mode Plus
● 12 MHz internal RC oscillator trimmed to 1 % accuracy
● Crystal oscillator with an operating range of 1 MHz to 25 MHz
● Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz
● PLL allows CPU operation up to the maximum CPU rate
● Clock output function with divider
● Unique device serial number for identification
● Single power supply (1.8 V ± 5%)
●## Target Applications
● Consumer Electronics
● Medical
●## Features