120 MHz, 32-bit Microcontrollers with Cortex-M3™ core, LPC1700 series
●The LPC1700 series of low power cost-effective Cortex-M3 microcontrollers feature best in-class peripheral support such as Ethernet, USB 2.0 Host/OTG/Device, and CAN 2.0B. Operating at speeds up to 120 MHz, they have up to 512 KB of FLASH, up to 64 KB of SRAM, 12-bit A/D and 10-bit D/A converters as well as an internal RC oscillator.
●Key Features
●► ARM Cortex-M3 core
● - Up to 120 MHz operation
● - Nested Vectored Interrupt Controller for fast deterministic interrupts
● - Wakeup Interrupt Controller allows automatic wake from any priority interrupt
● - Memory Protection Unit
● - Four reduced power modes: Sleep, Deep-sleep, Power-down and Deep power-down
●► Memories
● - Up to 512 KB Flash memory
● - Up to 64 KB SRAM
●► Serial Peripherals
● - 10/100 Ethernet MAC
● - USB 2.0 full-speed device/Host/ OTG controller with on-chip PHY
● - Four UARTs with fractional baud rate generation, RS-485. modem control I/O, and IrDA
● - Two CAN 2.0B controllers
● - Three SSP/SPI controllers
● - Three I2C-bus interfaces with one supporting fast mode plus (1 Mbit/s data rates)
● - I2S interface for digital audio
●► Analog Peripherals
● - 12-bit Analog-to-Digital Converter with eight channels
● - 10-bit Digital-to-Analog Converter
●► Other Peripherals
● - Real-Time Clock operating at < 1 uA
● - Eight channel General Purpose DMA controller
● - Up to 70 General Purpose I/O
● - Motor control PWM and Quadrature Encoder Interface to support three-phase motors
● - Four 32-bit general purpose timers/counters
● - 4 MHz internal RC oscillator trimmed to 1 % accuracy
