| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 100 Pin |
| Supply Voltage (DC) | 3.00V (min) |
| Operating Voltage | 3V ~ 3.6V |
| Case/Package | LQFP |
| Clock Speed | 72 MHz |
| RAM Memory Size | 58 KB |
| Number of Bits | 32 Bit |
| FLASH Memory Size | 256 KB |
| Number of ADCs | 1 ADC |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 1500 mW |
| Number of DACs | 1 DAC |
| Supply Voltage | 3V ~ 3.6V |
| Supply Voltage (Max) | 3.6 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Each |
| Operating Temperature | -40℃ ~ 85℃ |
General description
●The LPC2364/65/66/67/68 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate. For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode. For critical code size applications, the alternative 16-bit Thumb mode reducescode by more than 30 % with minimal performance penalty.
●Applications
●Industrial control
●Medical systems
●Protocol converter
●Communications
NXP
709 Pages / 3.16 MByte
NXP
Single-chip 16Bit/32Bit microcontrollers; up to 512KB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10Bit ADC/DAC
NXP
Single-chip 16Bit/32Bit microcontrollers; up to 512KB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10Bit ADC/DAC
NXP
LPC2366FBD100 - ARM7 with 256KB flash, 58KB SRAM, Ethernet, USB 2.0 Device, CAN, and 10Bit ADC QFP 100Pin
NXP
IC MCU 16/32B 256KB FLSH 100LQFP
NXP
IC ARM7 MCU FLASH 256K 100LQFP
NXP
IC MCU 16/32B 256KB FLSH 100LQFP
Philips
MCU 32Bit LPC2300 RISC 256KB Flash 3.3V 100Pin LQFP Tray
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
