Overview
●The LPC3240 operates at CPU frequencies of up to 266 MHz. The NXP® implementation uses an ARM926EJ-S CPU core with a Harvard architectur, 5-stage pipeline, and an integral Memory Management Unit (MMU). The LPC3240 also includes 256 kB of on-chip static RAM, a NAND flash interface, an Ethernet MAC, and an external bus interface that supports SDR and DDR SDRAM, as well as static devices. In addition, the LPC3240 includes a USB 2.0 full-speed interface, seven UARTs, two I2C-bus interfaces, two SPI/SSP ports, two I2S-bus interfaces, two single output PWMs, a motor control PWM, six general purpose timers with capture inputs and compare outputs, a Secure Digital (SD) interface, and a 10-bit Analog-to-Digital Converter (ADC) with a touch screen sense option.
●MoreLess
●## Features
● ARM926EJS processor, running at CPU clock speeds up to 266 MHz
● Vector Floating Point (VFP) coprocessor
● 32 kB instruction cache and a 32 kB data cache
● Up to 256 kB of Internal SRAM (IRAM)
● Selectable boot-up from various external devices
● Multi-layer AHB system that provides a separate bus for each AHB master
● External memory controller for DDR and SDR SDRAM as well as for static devices
● Two NAND flash controllers
● Master Interrupt Controller (MIC) and two Slave Interrupt Controllers (SIC)
● Eight channel General Purpose DMA (GPDMA) controller on the AHB
● 10/100 Ethernet MAC with dedicated DMA Controller
● USB interface supporting either device, host (OHCI compliant), or On-The-Go
● Four standard UARTs with fractional baud rate generation
● Three additional high-speed UARTs intended for on-board communications
● Two SPI controllers
● Two SSP controllers
● Two I2C-bus interfaces with standard open-drain pins
● Two I2S-bus interfaces, each with separate input and output channels
● Secure Digital (SD) memory card interface
● General Purpose (GP) input, output, and I/O pins
● 10 bit, 400 kHz Analog-to-Digital Converter (ADC)
● Real-Time Clock (RTC) with separate power pin and dedicated 32 kHz oscillator
● 32-bit general purpose high-speed timer with a 16-bit pre-scaler
● Six enhanced timer/counters
● 32-bit millisecond timer driven from the RTC clock
● WatchDog timer clocked by the peripheral clock
● Two single-output PWM blocks
● Motor control PWM
● Keyboard scanner function allows automatic scanning of an up to 8 x 8 key matrix
● Up to 18 external interrupts
● Standard ARM test/debug interface for compatibility with existing tools
● Emulation Trace Buffer (ETB) with 2048 x 24 bit RAM allows trace via JTAG
● Stop mode saves power
● On-chip crystal oscillator
● An on-chip PLL allows CPU operation up to the maximum CPU rate
● Boundary scan for simplified board testing
●## Target Applications
● Consumer
● Medical
● Industrial
● Network control
●## Features
