LPC812M101JDH16J Datasheet PDF - NXP

● System:

● ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.

● ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).

● System tick timer.

● Serial Wire Debug (SWD) and JTAG boundary scan modes supported.

● Micro Trace Buffer (MTB) supported.

● Memory:

● Up to 16 kB on-chip flash programming memory with 64 Byte page write and erase.

● Up to 4 kB SRAM.

● ROM API support:

● Boot loader.

● USART drivers.

● I2C drivers.

● Power profiles.

● Flash In-Application Programming (IAP) and In-System Programming (ISP).

● Digital peripherals:

● High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 18 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and glitch filter.

● High-current source output driver (20 mA) on four pins.

● High-current sink driver (20 mA) on two true open-drain pins.

● GPIO interrupt generation capability with boolean pattern-matching feature on eight GPIO inputs.

● Switch matrix for flexible configuration of each I/O pin function.