| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 2 Pin |
| Current Rating | 650 mA |
| Capacitance Tolerance | ±20 % |
| Case/Package (SI) | 3225 |
| Case/Package | 1210 |
| Inductance | 4.7 µH |
| Self Resonant Frequency | 43 MHz |
| Q-Factor | 35.0 |
| Part Family | LQH |
| Resistance | 150 mΩ |
| Resonant Frequency | 43.0 MHz |
| Inductance Tolerance | ±20 % |
| Test Frequency | 1 MHz |
| DC Resistance (DCR) | ≤195 mΩ |
| Current Rating (DC) | 650 mA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Accuracy | ±20 % |
| Resistance (DC Max) | 0.15 Ω |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3.2 mm |
| Size-Width | 2.5 mm |
| Size-Height | 2 mm |
| Operating Temperature | -40℃ ~ 85℃ |
| Minimum Packing Quantity | 2000 |
The LQH32CN4R7M33L is a wire wound surface mount High Frequency Inductor/Chip Coil with 1210 case. The wire wound inductor consists of a copper wire spirally wound around the ferrite core. The wire wound inductor for power circuits, coated with various resins over the copper wire wound around the ferrite core. The purpose of the coating resin is to improve the strength of the product. The merits of using a wire wound product are demonstrated when used in large current areas and high inductance areas. This inductor supports 43MHz minimum self-resonance frequency and ±20% inductance tolerance.
● -40 to 85°C Operating temperature range
●Do not use products beyond the rated current as this may create excessive heat.
●Solderability of tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used.
muRata
2 Pages / 0.02 MByte
muRata
3 Pages / 0.12 MByte
muRata
86 Pages / 2.12 MByte
muRata
7 Pages / 0.2 MByte
muRata
249 Pages / 6.4 MByte
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
