LT1011CS8#PBF Datasheet PDF - Linear Technology

The LT1011CS8#PBF is a general purpose Voltage Comparator with significantly better input characteristics than the LM111. Although pin compatible with the LM111, it offers four times lower bias current, six times lower offset voltage and five times higher voltage gain. Offset voltage drift is guaranteed at 15µV/°C. Additionally, the supply current is lower by a factor of two with no loss in speed. The LT1011 is several times faster than the LM111 when subjected to large overdrive conditions. The LT1011 retains all the versatile features of the LM111, including single 3 to ±18V supply operation and a floating transistor output with 50mA source/sink capability. It can drive loads referenced to ground, negative supply or positive supply and is specified up to 50V between V- and the collector output. A differential input voltage up to the full supply voltage is allowed, even with ±18V supplies, enabling the inputs to be clamped to the supplies with simple diode clamps.

● Guaranteed maximum 0.5mV input offset voltage

● Guaranteed maximum 25nA input bias current

● Guaranteed maximum 3nA input offset current

● Guaranteed maximum 250ns response time

● Guaranteed minimum 200,000 voltage gain

● 50mA Output current source or sink

● ±30V Differential input voltage

● Fully specified for single 5V operation