| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 155 kHz |
| Number of Pins | 8 Pin |
| Case/Package | SOIC-8 |
| Power Rating | 500 mW |
| Number of Outputs | 1 Output |
| Output Voltage | 12 V |
| Output Current | 1.25 A |
| Number of Positions | 8 Position |
| Switching Frequency | 185 kHz |
| Input Voltage (Max) | 10 V |
| Input Voltage (Min) | 1.8 V |
| Output Current (Max) | 0.12 a |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Input Voltage | 1.8.10 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Cut Tape (CT) |
| Size-Length | 5 mm |
| Size-Width | 3.81 mm |
| Size-Height | 1.5 mm |
| Operating Temperature | 0℃ ~ 70℃ (TA) |
The LT1301CS8#PBF is a micropower step-up DC/DC Converter utilizes Burst Mode™ operation. The device can deliver 5 or 12V from a two-cell battery input. It features programmable 5 or 12V output via a logic-controlled input, no-load quiescent current of 120µA and a shutdown pin which reduces supply current to 10µA. The on-chip power switch has a low 170mV saturation voltage at a switch current of 1A, a four-fold reduction over prior designs. A 155kHz internal oscillator allows the use of extremely small surface mount inductors and capacitors. Operation is guaranteed at 1.8V input. This allows more energy to be extracted from the battery, increasing operating life. The ILIM pin can be used for soft start or to program peak switch current with a single resistor allowing the use of even smaller inductors in lighter load applications.
● Better high current efficiency than CMOS
● Up to 89% Efficiency
● Shutdown to 10µA
● ILIM Pin programs peak switch current
● Uses inexpensive surface mount inductors
● 120µA Quiescent current
Linear Technology
1 Pages / 0.71 MByte
Linear Technology
4 Pages / 0.19 MByte
Linear Technology
LT1301 - Micropower High Efficiency 5V/12V Step-Up DC-DC Converter for Flash Memory
ADI
Switching Regulator, Current-mode, 0.75A, 155kHz Switching Freq-Max, BIPolar, PDSO8
Linear Technology
Conv DC-DC 1.8V to 10V Step Up Single-Out 5V/12V 0.12A Micropower 8Pin SOIC N Tube
ADI
Conv DC-DC 1.8V to 10V Step Up Single-Out 5V/12V 0.12A Micropower 8-Pin SOIC N Tube
ADI
Micropower High Efficiency 5V/12V Step-Up DC/DC Converter for Flash Memory
Linear Technology
Boost Switching Regulator IC Positive Programmable 5V, 12V 1 Output 750mA (Switch) 8-SOIC (0.154", 3.9mm Width)
Linear Technology
LT1301 - Micropower High Efficiency 5V/12V Step-Up DC-DC Converter for Flash Memory
ADI
Switching Regulator, Current-mode, 0.75A, 155kHz Switching Freq-Max, BIPolar, PDSO8
Linear Technology
Micropower High Efficiency 5V/12V Step-up DC-DC Converter For Flash Memory
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
