LT3650EDD-4.1#PBF Datasheet PDF - Linear Technology

The LT3650EDD-4.1#PBF is a complete monolithic single-cell Li-ion/polymer Battery Charger provides a constant-current/constant-voltage charge characteristic, with maximum charge current externally programmable up to 2A, set using an external current sense resistor. A precondition feature trickle charges a low voltage battery and bad-battery detection provides a signal and suspends charging if a battery does not respond to preconditioning. It can be configured to terminate charging when charge current falls to C/10, or one-tenth the programmed maximum current. Once charging is terminated, the charger enters a low current standby mode. An auto-restart feature starts a new charging cycle if the battery voltage drops 2.5% from the float voltage, or if a new battery is inserted into a charging system. It contains user-programmable internal safety timer.

● Dynamic charge rate programming/soft-start pin

● Programmable input current limit

● No VIN blocking diode required

● 1MHz fixed frequency

● Average current mode control

● 0.5% Float voltage accuracy

● 5% Charge current accuracy

● 2.5% C/10 Detection accuracy

● NTC resistor temperature monitor

● Auto-recharge at 97.5% Float voltage

● Auto-precondition at <70% Float voltage

● Bad-battery detection with auto-reset