TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 10 Pin |
Supply Voltage (DC) | 4.00V (min) |
Case/Package | MSOP-10 |
Number of Circuits | 1 Circuit |
Number of Channels | 1 Channel |
Number of Positions | 10 Position |
Operating Temperature (Max) | 125 ℃ |
Operating Temperature (Min) | -55 ℃ |
Supply Voltage (Max) | 80 V |
Supply Voltage (Min) | 4 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 3 mm |
Size-Width | 3 mm |
Size-Height | 0.86 mm |
The LT4356MPMS-1#PBF is a Surge Stopper protects loads from high voltage transients. It regulates the output during an overvoltage event, such as load dump in automobiles, by controlling the gate of an external N-channel MOSFET. The output is limited to a safe value thereby allowing the loads to continue functioning. The LT4356MP also monitors the voltage drop between the VCC and SNS pins to protect against overcurrent faults. An internal amplifier limits the current sense voltage to 50mV. In either fault condition, a timer is started inversely proportional to MOSFET stress. If the timer expires, the FLT pin pulls low to warn of an impending power-down. If the condition persists, the MOSFET is turned off. After a cool down period, the GATE pin pulls up turning on the MOSFET again. The auxiliary amplifier may be used as a voltage detection comparator or as a linear regulator controller driving an external PNP pass transistor.
● Stops high voltage surges
● Adjustable output clamp voltage
● Overcurrent protection
● Adjustable fault timer
● Controls N-channel MOSFET
● Fault output indication
● Auxiliary amplifier for level detection comparator or linear regulator controller
Linear Technology
24 Pages / 0.22 MByte
Linear Technology
1 Pages / 0.16 MByte
Linear Technology
Hot Swap Controller 1CH 80V N-Channel Positive Voltage Automotive 10Pin MSOP Tube
ADI
Surge Stopper and over protection
Linear Technology
Hot Swap Controller 1CH 80V N-Channel Positive Voltage Automotive 10Pin MSOP Tube
Linear Technology
Hot Swap Controller 1CH 80V N-Channel Positive Voltage Automotive 10Pin MSOP T/R
ADI
Surge Stopper and over protection
Linear Technology
Hot Swap Controller 1CH 80V N-Channel Positive Voltage Automotive 10Pin MSOP T/R
ADI
Analog Circuit, 1 Func, PDSO10
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.