| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Case/Package | DIP-8 |
| Supply Current | 1.7 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Bandwidth | 1.2 MHz |
| Slew Rate | 4.00 V/μs |
| Gain Bandwidth Product | 1.2 MHz |
| Input Offset Voltage | 0.5 µV |
| Input Bias Current | 1 pA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 1.2 MHz |
| Minimum CMRR Range | 120 dB |
| Supply Voltage | 4.75V ~ 16V |
| Supply Voltage (Max) | 16 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Each |
| Size-Length | 19.56 mm |
| Size-Width | 6.477 mm |
| Size-Height | 3.302 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The LTC1052CN8#PBF is a low noise zero-drift Operational Amplifier for use with strain gauge amplifiers. Chopper-stabilization constantly corrects offset voltage errors. Both initial offset and changes in the offset due to time, temperature and common mode voltage are corrected. This, coupled with picoampere input currents, gives these amplifiers unmatched performance. Low frequency (1/f) noise is also improved by the chopping technique. Instead of increasing continuously at a 3dB/octave rate, the internal chopping causes noise to decrease at low frequencies. The chopper circuitry is entirely internal and completely transparent to the user. Only two external capacitors are required to alternately sample-and-hold the offset correction voltage and the amplified input signal. Control circuitry is brought out on the 14-pin and 16-pin versions to allow the sampling of the LTC1052 to be synchronized with an external frequency source.
● 5µV Guaranteed maximum offset
● 0.05µV/°C Guaranteed maximum offset drift
● 0.01µV/°C Typical offset drift
● 100nV/√Month Excellent long term stability
● 30pA Guaranteed maximum input bias current
● External capacitors can be returned to V- with no noise degradation
Linear Technology
24 Pages / 0.83 MByte
Linear Technology
1 Pages / 0.13 MByte
Linear Technology
Op Amp Single GP ±8V/16V 8Pin PDIP N
ADI
Operational Amplifier, 1 Func, 5uV Offset-Max, CMOS, PDIP8
Linear Technology
LINEAR TECHNOLOGY LTC1052CN8#PBF Operational Amplifier, Single, 1 Amplifier, 1.2MHz, 4V/µs, 4.75V to 16V, DIP, 8Pins
ADI
Zero-Drift Operational Amplifier
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
