LTC6992CS6-3#TRMPBF Datasheet PDF - Linear Technology

The LTC6992CS6-3#TRMPBF is a voltage-controlled Pulse Width Modulator that is easy-to-use. It is part of the TimerBlox® family of versatile silicon timing devices. A single resistor, RSET, programs the LTC6992"s internal master oscillator frequency. The output frequency is determined by this master oscillator and an internal frequency divider, NDIV, programmable to eight settings from 1 to 16384. The LTC6992-3 will provide one-sided clamping and allows 0 to 95% duty cycle. When power is first applied, the power-on reset (POR) circuit will initiate the start-up time, tSTART. The OUT pin is held low during this time. The simplest and most accurate method to program the LTC6992 is to use a single resistor, RSET, between the SET and GND pins.

● Pulse width modulation (PWM) controlled by simple 0V to 1V analogue input

● Minimum duty cycle at 0 or 5%

● Maximum duty cycle at 95 or 100%

● 3.81Hz to 1MHz Frequency range

● Configured with 1 to 3 resistors

● <1.7% Maximum frequency error

● <3.7% Maximum PWM duty cycle error

● Frequency modulation (VCO) capability

● Single-supply operation

● 115µA Supply current at 100kHz

● 500µs Start-up time

● CMOS output driver sources/sinks 20mA