The M24LR-DISCOVERY is a ready to use discovery kit which features the M24LR04E-R dual interface EEPROM IC. The M24LR04E-R device is a dynamic NFC/RFID tag IC with a dual interface, electrically erasable programmable memory (EEPROM). It features an I2C interface and can be operated from a VCC power supply. It is also a contactless memory powered by the received carrier electromagnetic wave. The M24LR board is battery less and is powered by RFID readers or NFC enabled phones supporting ISO/IEC 15693. The RF transceiver board is an RFID reader demonstration board and is composed, among other parts, of a CR95HF (13.56MHz multi protocol contactless transceiver IC with SPI and UART serial access). This board has to be plugged in to a PC and comes with a demonstration software. The M24LR board also works with Android NFC phones supporting ISO/IEC 15693. An application called NfcV reader is available on Google Play. Performance may vary depending on NFC phone"s RF management.
● STM8L152C6T6 8bit microcontroller, with 8KB of flash memory
● STTS751-0WB3F, low voltage digital temperature sensor
● 20mm x 40mm inductive antenna etched on the PCB
● Two function buttons (user and reset)
● SWIM connector for programming and debugging
● I2C connector
● LCD (24 segments, 4 commons)
● STM32F103CB 32bit microcontroller, with 128KB of flash memory
● 47mm x 34mm 13.56MHz inductive antenna etched on PCB and associated circuitry
● USB connector for communication with host PC and demonstration board powering