SUMMARY DESCRIPTION
●The M28W160C is a 16 Mbit (1 Mbit x 16) non-volatile Flash memory that can be erased electrically at the block level and programmed in-system on a Word-by-Word basis. These operations can be performed using a single low voltage (2.7 to 3.6V) supply. VDDQ allows to drive the I/O pin down to 1.65V. An optional 12V VPP power supply is provided to speed up customer programming.
●FEATURES SUMMARY
●■ SUPPLY VOLTAGE
● – VDD = 2.7V to 3.6V Core Power Supply
● – VDDQ= 1.65V to 3.6V for Input/Output
● – VPP = 12V for fast Program (optional)
●■ ACCESS TIME: 70, 85, 90,100ns
●■ PROGRAMMING TIME:
● – 10µs typical
● – Double Word Programming Option
●■ COMMON FLASH INTERFACE
● – 64 bit Security Code
●■ MEMORY BLOCKS
● – Parameter Blocks (Top or Bottom location)
● – Main Blocks
●■ BLOCK LOCKING
● – All blocks locked at Power Up
● – Any combination of blocks can be locked
● – WP for Block Lock-Down
●■ SECURITY
● – 64 bit user Programmable OTP cells
● – 64 bit unique device identifier
● – One Parameter Block Permanently Lockable
●■ AUTOMATIC STAND-BY MODE
●■ PROGRAM and ERASE SUSPEND
●■ 100,000 PROGRAM/ERASE CYCLES per BLOCK
●■ ECOPACK® PACKAGES AVAILABLE
●■ ELECTRONIC SIGNATURE
● – Manufacturer Code: 20h
