| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 28 Pin |
| Supply Voltage (DC) | 5.00 V |
| Case/Package | SSOP-28 |
| Supply Current | 20 mA |
| Number of Positions | 28 Position |
| Data Rate | 120 kbps |
| Drivers Per Package | 4 |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 4.5V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 4.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 10.2 mm |
| Size-Width | 5.3 mm |
| Size-Height | 1.95 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The MAX213IDBR is a RS-232 multichannel Line Driver/Receiver consists of four line drivers, five line receivers and a dual charge-pump circuit with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signalling rates up to 120kbps and a maximum of 30V/µs driver output slew rate. The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V- is pulled to GND and the transmitter outputs are disabled. This reduces supply current typically to 1µA. Two receivers of the MAX213 are active during shutdown.
● Designed to be interchangeable with Maxim MAX213
● Latch-up performance exceeds 100mA per JESD 78, class II
● 15µA Typical low supply current in shutdown mode
● 4 x 0.1µF External capacitors
● Green product and no Sb/Br
TI
5V Multichannel RS-232 Line Driver/Receiver with 15kV ESD Protection
Maxim Integrated
+5V, RS-232 Transceivers with 0.1μF External Capacitors
TI
5V Multichannel RS-232 Line Driver/Receiver with 15kV ESD Protection 28-SSOP 0 to 70
TI
5V Multichannel RS-232 Line Driver/Receiver with 15kV ESD Protection 28-SSOP -40℃ to 85℃
Maxim Integrated
RS-232Interface IC 15kV ESD-Protected 5V RS232 Transceiver
Maxim Integrated
Line Transmitter/Receiver 4TR 4TX 5RX 28Pin SSOP T/R
Maxim Integrated
RS-232Interface IC 15kV ESD-Protected 5V RS232 Transceiver
Maxim Integrated
RS-232Interface IC 15kV ESD-Protected 5V RS232 Transceiver
TI
TEXAS INSTRUMENTS MAX213CDWR RS232 Transceiver IC, 4 Drivers, 120Kbps, 4.5V to 5.5V, SOIC-28
Maxim Integrated
Quad Transmitter Quint Receiver RS-232 28Pin SSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
