| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 3.30 V, 5.00 V |
| Case/Package | TSSOP-20 |
| Output Voltage | ≤5.40 V |
| Supply Current | 1 mA |
| Number of Positions | 20 Position |
| Data Rate | 250 kbps |
| Drivers Per Package | 2 |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 3V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 6.5 mm |
| Size-Width | 4.4 mm |
| Size-Height | 1.15 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The MAX3222CPW is a RS-232 multichannel Line Driver/Receiver with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. The device operates at data signalling rates up to 250kbps and a maximum of 30V/µs driver output slew rate. It can be placed in the power-down mode by setting PWRDOWN low, which draws only 1µA from the power supply. When the device is powered down, the receivers remain active while the driver is placed in the high-impedance state. Also, during power-down, the onboard charge pump is disabled, V+ is lowered to VCC and V- is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting EN high.
● Alternative high-speed pin-compatible device (1Mbps) for SNx5C3222
● 1µA Typical Low standby current
● Green product and no Sb/Br
TI
3V to 5.5V Multichannel RS-232 Line Driver/Receiver
Maxim Integrated
3V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors
Tigal
3V to 5.5V, Low-Power, up to 1Mbps, Tr ue RS-232 Transceivers Using Four 0.1μF External Capacitors
TI
TEXAS INSTRUMENTS MAX3222IDBR RS232 Transceiver IC, 2 Drivers, 250Kbps, 3V to 5.5V, SSOP-20
TI
Dual Transmitter/Receiver RS-232 20Pin SSOP T/R
Maxim Integrated
Dual Transmitter/Receiver RS-232 20Pin TSSOP
TI
3V to 5.5V Multichannel S-232 Line Driver/ eceiver 20-SSOP -40℃ to 85℃
Maxim Integrated
15kV ESD-Protected, Down to 10nA, 3V to 5.5V, Up to 1Mbps, True RS-232 Transceivers
Maxim Integrated
* For Smaller Packaging: * MAX3228E/MAX3229E: +2.5V to +5.5V RS-232 Transceivers in UCSP™ * For Integrated ESD Protection: * MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA, 3V to 5.5V, Up to 1Mbps, True RS-232 Transceivers * For Low-Voltage or Data Cable Applications: * MAX3380E/MAX3381E: +2.35V to +5.5V, 1μA, 2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins
Maxim Integrated
Dual Transmitter/Receiver RS-232 18Pin SOIC W
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
