| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 3.30 V, 5.00 V |
| Case/Package | TSSOP-20 |
| Supply Current | 1 mA |
| Number of Positions | 20 Position |
| Data Rate | 250 kbps |
| Drivers Per Package | 2 |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 3V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 85℃ |
The MAX3222 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output slew rate.
●The MAX3222 can be placed in the power-down mode by setting PWRDOWN low, which draws only 1 μA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Receiver outputs also can be placed in the high-impedance state by setting EN high.
TI
3V to 5.5V Multichannel RS-232 Line Driver/Receiver
Maxim Integrated
3V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1μF External Capacitors
Tigal
3V to 5.5V, Low-Power, up to 1Mbps, Tr ue RS-232 Transceivers Using Four 0.1μF External Capacitors
TI
TEXAS INSTRUMENTS MAX3222IDBR RS232 Transceiver IC, 2 Drivers, 250Kbps, 3V to 5.5V, SSOP-20
TI
Dual Transmitter/Receiver RS-232 20Pin SSOP T/R
Maxim Integrated
Dual Transmitter/Receiver RS-232 20Pin TSSOP
TI
3V to 5.5V Multichannel S-232 Line Driver/ eceiver 20-SSOP -40℃ to 85℃
Maxim Integrated
15kV ESD-Protected, Down to 10nA, 3V to 5.5V, Up to 1Mbps, True RS-232 Transceivers
Maxim Integrated
* For Smaller Packaging: * MAX3228E/MAX3229E: +2.5V to +5.5V RS-232 Transceivers in UCSP™ * For Integrated ESD Protection: * MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA, 3V to 5.5V, Up to 1Mbps, True RS-232 Transceivers * For Low-Voltage or Data Cable Applications: * MAX3380E/MAX3381E: +2.35V to +5.5V, 1μA, 2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins
Maxim Integrated
Dual Transmitter/Receiver RS-232 18Pin SOIC W
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
