TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 20 Pin |
Supply Voltage (DC) | 2.30V (min) |
Case/Package | TSSOP-20 |
Number of Outputs | 8 Output |
Output Voltage | 0.4 V |
Output Current | 300 mA |
Number of Channels | 8 Channel |
Number of Positions | 20 Position |
Power Dissipation | 1739 mW |
Output Current (Max) | 70 mA |
Fall Time | 2 µs |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage | 2.3V ~ 5.5V |
Supply Voltage (Max) | 5.5 V |
Supply Voltage (Min) | 2.3 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Unknown |
Packaging | Each |
Size-Length | 6.6 mm |
Size-Width | 4.5 mm |
Size-Height | 0.95 mm |
Operating Temperature | -40℃ ~ 85℃ |
The MAX4820EUP+ is a 8-channel Cascadable Relay Driver with serial/parallel interface. The MAX4820 relay driver offers built-in kickback protection and drive +3.3V/+5V non-latching or dual-coil-latching relays. This device is especially useful when driving +3V relays. Each independent open-drain output features a 2R on-resistance and is guaranteed to sink 70mA (min) of load current. This device consume less than 50µA (maximum) quiescent current and have 1µA output off-leakage current. The MAX4820 features an SPI™-/QSPI™-/MICROWIRE™-compatible serial interface. Input data is shifted into an 8-bit shift register and latched to the outputs when CS transitions from low to high. Each data bit in the shift register corresponds to a specific output, allowing independent control of all outputs.
● Built-in inductive kickback protection
● Guaranteed 70mA (minimum) coil drive current
● Active-low set function to turn on all outputs simultaneously
● Active-low reset function to turn off all outputs simultaneously
● SPI-/QSPI-/MICROWIRE-compatible serial interface
● Serial digital output for daisy chaining
● Low 50µA (maximum) quiescent supply current
Maxim Integrated
12 Pages / 0.35 MByte
Maxim Integrated
12 Pages / 0.84 MByte
Maxim Integrated
3.3V/+5V, 8Channel, Cascadable Relay Drivers with Serial/Parallel Interface
Maxim Integrated
Maxim MAX4820ETP+, MOSFET Power Driver 70mA, 2.3 → 5.5V, Non-Inverting, 20Pin TQFN
Maxim Integrated
Relay Driver 20Pin TQFN EP T/R
Maxim Integrated
Maxim MAX4820EUP+, Octal MOSFET Power Driver,, 2.3 → 5.5V, 20Pin TSSOP
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX4820EUP+T RELAY DRIVER, 8CH, 5.5V, TSSOP-20
Maxim Integrated
Relay Driver 20Pin TQFN EP
Maxim Integrated
Relay Driver 20Pin TSSOP T/R
Dallas Semiconductor
Driver; relay controller; 70mA; Channels:8; TSSOP20
Maxim Integrated
Buffer/Inverter Based Peripheral Driver, 8 Driver, 0.07A, BICMOS, 4 X 4 MM, 0.80 MM PITCH, MO-220, QFN-20
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.