| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Case/Package | DIP-8 |
| Supply Current | 150 µA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Power Dissipation | 727 mW |
| Slew Rate | 200 mV/μs |
| Gain Bandwidth Product | 500 kHz |
| Input Offset Voltage | 200 µV |
| Input Bias Current | 25 nA |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Tube |
| Size-Length | 9.91 mm |
| Size-Width | 7.87 mm |
| Size-Height | 4.45 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The dual MAX492, quad MAX494, and single MAX495 operational amplifiers combine excellent DC accuracy with rail-to-rail operation at the input and output. Since the common-mode voltage extends from VCCto VEE, the devices can operate from either a single supply (+2.7V to +6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 150µA supply current. Even with this low current, the op amps are capable of driving a 1kΩload, and the input referred voltage noise is only 25nV/√Hz. In addition, these op amps can drive loads in excess of 1nF.
●The precision performance of the MAX492/MAX494/MAX495, combined with their wide input and output dynamic range, low-voltage single-supply operation, and very low supply current, makes them an ideal choice for battery-operated equipment and other low-voltage applications.
●The MAX492/MAX494/MAX495 are available in DIP and SO packages in the industry-standard op-amp pin configurations. The MAX495 is also available in the smallest 8-pin SO: the µMAX package.
Maxim Integrated
17 Pages / 0.23 MByte
Maxim Integrated
9 Pages / 0.38 MByte
Maxim Integrated
The dual MAX492, quad MAX494, and single MAX495 operational amplifiers combine excellent DC accuracy with rail-to-rail operation at the input and output
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX492CPA+ Operational Amplifier, 2 Amplifier, 500kHz, 0.2V/µs, 2.7V to 6V, DIP, 8Pins
Maxim Integrated
OP Amp Dual GP R-R I/O ±3V/6V 8Pin SOIC N T/R
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX492CSA+ Operational Amplifier, 2 Amplifier, 500kHz, 0.2V/µs, 2.7V to 6V, SOIC, 8Pins
Maxim Integrated
Analog Circuit, 1 Func, BICMOS, 1.50 X 1MM, 0.8MM HEIGHT, LEAD FREE, MO-250WAAD, MDFN-6
Maxim Integrated
IC OPAMP GP 500kHz RRO 8SOIC
Maxim Integrated
Consumer Circuit, BICMOS, 4 X 4MM, 0.8MM HEIGHT, LEAD FREE, MO-220WGGD-1, TQFN-20
Maxim Integrated
Consumer Circuit, BICMOS, PDSO20, 0.15INCH, 0.635MM PITCH, LEAD FREE, MO-137, QSOP-20
Maxim Integrated
Analog Switch Hex DPDT 56Pin TQFN EP
Maxim Integrated
OP Amp Dual GP R-R I/O ±3V/6V 8Pin PDIP N
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
