The MAX6192CESA+ from Maxim Integrated Products is a precision, micropower, low dropout voltage reference in 8 pin NSOIC package. It offers high initial accuracy of ±10mV and very low temperature coefficient of 25ppm/°C through curvature correction circuit and laser trimmed precision thin film resistors. This series mode bandgap reference draws maximum of only 35µA quiescent supply current which makes the device ideal for battery powered instruments. It offers supply current that is virtually immune to input voltage variations. This device is internally compensated and ideal for applications that require fast settling and are stable with capacitive loads up to 2.2nF. It is typically used in hand-held instruments, analogue to digital and digital to analogue converters, precision 3V/5V systems and hard disk drives.
● Supply voltage range from 2.7V to 12.6V
● Operating temperature range from -40°C to +85°C
● 100mV dropout voltage at 500µA load current
● Load regulation of 0.14µV/µA (sourcing 0 <= IOUT <= 500µA)
● Line regulation of 15µV/V ((VOUT + 0.2V) <= VIN <= 12.6V)
● Output voltage of 2.5V
● Noise voltage of 60µVP-P at f = 0.1Hz to 10Hz and 125µVRMS at f = 10Hz to 10KHz
● Ripple rejection of 82dB at VIN = 5V ±100mV, f = 120Hz
● 0.8µA/V change in supply current