MAX6382XR29D3+T Datasheet PDF - Maxim Integrated

The MAX6382XR29D3+T is a single low voltage, low power microprocessor (µP) reset circuit in 3 pin SC-70 package. This microprocessor (µP) supervisory circuit monitors power supply voltage ranging from +1.8V to +5V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset output asserts and remains asserted for a minimum reset timeout period after VCC rises above the reset threshold. It has a push-pull active-high reset output. Typical application includes controllers, intelligent instruments, critical microprocessor (µP) and microcontroller (µC) power monitoring and battery powered equipment.

● Supply voltage range is 1V to 5.5V

● Operating temperature range from -40°C to 125°C

● Reset threshold voltage is 2.93V

● Reset threshold accuracy is ±2.5%

● Reset timeout delay is 280ms

● Reset output state is valid to VCC = 1V

● Negative going VCC transient immunity

● Low power consumption of 6µA at +3.6V