| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 5.50V (max) |
| Case/Package | DIP-16 |
| Power Rating | 842 mW |
| Input Voltage (DC) | 5.50 V |
| Output Voltage | 7 V |
| Number of Positions | 16 Position |
| Output Voltage (Max) | 18 V |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 4.5V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 4.5 V |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Each |
| Size-Length | 19.43 mm |
| Size-Width | 7.87 mm |
| Size-Height | 4.45 mm |
| Operating Temperature | 0℃ ~ 70℃ (TA) |
The MAX712CPE+ is a NiCd/NiMH battery Fast-charge Controller from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analogue-to-digital converter, timer and temperature window comparator determine charge completion. This is powered by the DC source via an on-board +5V shunt regulator. They draw a maximum of 5µA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery"s load.
● Voltage slope, temperature and timer fast-charge cut-off
● Supply battery load while charging (linear mode)
● Fast charge from C/4 to 4C rate
● C/16 Trickle-charge rate
● Automatically switch from fast to trickle charge
● Linear mode power control
Maxim Integrated
17 Pages / 0.23 MByte
Maxim Integrated
18 Pages / 0.16 MByte
Maxim Integrated
16 Pages / 0.13 MByte
Maxim Integrated
NiCd/NiMH Battery Fast-Charge Controllers
Maxim Integrated
Fast Charge Management NiCD/NiMH 2000mA 18V 16Pin SOIC N
Maxim Integrated
Fast Charge Management NiCD/NiMH 2000mA 18V 16Pin SOIC N T/R
Maxim Integrated
ADC, Dual-Slope, 4Bit, 1 Func, 1Channel, Parallel, Word Access, CMOS, PDIP40, LEAD FREE, PLASTIC, DIP-40
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX712CPE+ Battery Charger for 16 Cells of NiCd, NiMH battery, 5.5V input, 17V / 2A charge, DIP-16
Maxim Integrated
Fast Charge Management NiCD/NiMH 2000mA 18V 16Pin SOIC N
Maxim Integrated
Fast Charge Management NiCD/NiMH 2000mA 18V 16Pin SOIC N
Maxim Integrated
Fast Charge Management NiCD/NiMH 2000mA 18V 16Pin SOIC N T/R
Maxim Integrated
ADC Single Dual Slope 4 1/2Digit LCD 44Pin PLCC
Maxim Integrated
Fast Charge Management NiCD/NiMH 2000mA 18V 16Pin PDIP N
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
