| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 16.5V (max) |
| Voltage Rating (DC) | 18.0 V |
| Case/Package | DIP-8 |
| Power Rating | 727 mW |
| Output Current | 50 mA |
| Number of Positions | 8 Position |
| Power Dissipation | 727 mW |
| Threshold Voltage | Adjustable |
| Reset Threshold Voltage (Min) | 1.11 V |
| Reset Threshold Voltage (Max) | 1.19 V |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Supply Voltage | 2.16.5 VDC |
| Supply Voltage (Max) | 16.5 V |
| Supply Voltage (Min) | 2 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
| Packaging | Each |
| Size-Length | 9.91 mm |
| Size-Width | 7.87 mm |
| Size-Height | 4.45 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The MAX8212CPA+ is a microprocessor voltage monitor with programmable voltage detection in 8 pin DIP package. This CMOS micropower voltage detector indicates microprocessors (µPs) power failures. It contains a comparator, a 1.5V band gap reference and an open-drain n-channel output driver. Two external resistors are used in conjunction with the internal reference to set the trip voltage to the desired level. A hysteresis output allows the user to apply positive feedback for noise-free output switching. The MAX8212 output turns on when a voltage greater than 1.5V at the threshold pin. It is not current limited and will typically sink 35mA. This device is a plug-in replacement for the bipolar ICL8211/ICL8212 in applications where the maximum supply voltage is less than 16.5V. It offers several performance advantages including reduced supply current, a tightly controlled band gap reference and more available current from the hysteresis output.
● Supply voltage range is 2V to 16.5V
● Operating temperature range from 0°C to 70°C
● Supply current is 5µA
● Threshold trip voltage range from 1.11V to 1.19V
● Quiescent current is 5µA
● ±40mV threshold accuracy (±3.5%)
● On-board hysteresis output
Maxim Integrated
7 Pages / 0.08 MByte
Maxim Integrated
14 Pages / 0.14 MByte
Maxim Integrated
3 Pages / 0.04 MByte
Maxim Integrated
Microprocessor Voltage Monitors with Programmable Voltage Detection
Maxim Integrated
Processor Supervisor 8Pin PDIP N
Maxim Integrated
Processor Supervisor 8Pin SOIC N
Maxim Integrated
Power Supply Support Circuit, Adjustable, 1Channel, CMOS, PDSO8, 0.15INCH, LEAD FREE, SOIC-8
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX8212EPA+ MPU Supervisor, 2V-16.5V supply, Active-Low, Open-Drain reset, 1.19V threshold, DIP-8
Maxim Integrated
Processor Supervisor 8Pin PDIP N
Maxim Integrated
Processor Supervisor 8Pin SOIC N
Maxim Integrated
Microprocessor Voltage Monitors with Programmable Voltage Detection
Maxim Integrated
Processor Supervisor 8Pin SOIC N T/R
Maxim Integrated
Processor Supervisor 8Pin uMAX
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
