MAX8526EUD+ Datasheet PDF - Maxim Integrated

The MAX8526EUD+ is a 1.425V to 3.6V input, 2A, 0.2V dropout LDO regulator in 14 pin TSSOP package. The output voltage can be set from 0.5V to (VIN - 0.2V) and is 1.4% accurate over load and line variations, from 0°C to +85°C. This regulator use small, 2.2µF ceramic input capacitors and 10µF ceramic output capacitors to deliver 2A output current. High bandwidth provides excellent transient response and limits the output voltage deviation to 45mV for a 20mA to 2A load step with only a 10µF ceramic output capacitor and the voltage deviations can be reduced further by increasing the output capacitor. Designed with an internal P-channel MOSFET pass transistor, the MAX8526 feature low 500µA typical supply current during dropout conditions.

● Initial accuracy is ±0.6%

● Operating temperature range from -40°C to 85°C

● Soft start limits inrush current

● Compatible with ceramic capacitors

● Fast transient response

● Operating supply current is 440µA

● Shutdown supply current is less than 50µA

● Logic controlled shutdown mode

● Short circuit protection

● Thermal overload protection