MC100EL32DG Datasheet PDF - ON Semiconductor

The MC10EL/100EL32 is an integrateddivide by 2 divider. The differential clock inputs and the V allow a differential, single-ended or AC coupled interface to the device. If used, the V output should be bypassed to ground with a 0.01 F capacitor. Also note that the V is designed to be used as an input bias on the EL32 only, the V output has limited current sink and source capability. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random state; the reset allows for the synchronization of multiple EL32"s in a system.The 100 Series contains temperature compensation.

●Features

●---

● |

● 510ps Propagation Delay

● 3.0GHz Toggle Frequency

● ESD Protection: > 1 KV HBM, > 100 V MM

● PECL Mode Operating Range: VCC= 4.2 V to 5.7 V with VEE= 0 V

● NECL Mode Operating Range: VCC= 0 V with VEE= -4.2 V to -5.7 V

● Internal Input Pulldown Resistors on CLK(s) and R.

● Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test

● Moisture Sensitivity Level 1

●For Additional Information, see Application Note AND8003/D

● Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34

● Transistor Count = 82 devices