The MC100LVEL16 is a differential receiver. The device is functionally equivalent to the EL16 device, operating from a 3.3 V supply. The LVEL16 exhibits a wider VIHCMR range than its EL16 counterpart. With output transition times and propagation delays comparable to the EL16 the LVEL16 is ideally suited for interfacing with high frequency sources at 3.3 V supplies. Under open input conditions, the Q input will be pulled down to V and the Qbar input will be biased to V/2. This condition will force the Q output low. The V pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V as a switching reference voltage. V may also rebias AC coupled inputs. When used, decouple V via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.
●Features
●---
● |
● 300 ps Propagation Delay
● High Bandwidth Output Transitions
● ESD Protection: >2 KV HBM, > 200 V MM
● The 100 Series Contains Temperature Compensation
● PECL Mode Operating Range: VCC= 3.0 V to 3.8 V with VEE= 0 V
● NECL Mode Operating Range: VCC= 0 V with VEE= -3.0 V to -3.8 V
● Internal Input Pulldown Resistors on D, Pullup and Pulldown Resistors on Dbar
● Q Output will Default LOW with Inputs Open or at VEE
● Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
● Moisture Sensitivity Level 1
●For Additional Information, see Application Note AND8003/D
● Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
● Transistor Count = 79 devices
