The MC11605A12W-VNMLB is a 16-character x 1 line Alphanumeric LCD Display with VA negative transmissive LCD type, blue (high light) LED backlight and RW1063 IC. This system interface (parallel 8-bit bus and 4-bit bus) chip has all four kinds interface type with MPU, IIC, 4SPI, 4-bit bus and 8-bit bus. Serial and parallel buses (4-bit/8-bit) are selected by IF1 and IF0 input pins and 4-bit bus and 8-bit bus is selected by DL bit in the instruction register. During read or write operation, two 8-bit registers are used. One is data register (DR); the other is instruction register (IR). The data register (DR) is used as temporary data storage place for being written into or read from DDRAM/CGRAM, target RAM is selected by RAM address setting instruction. Each internal operation, reading from or writing into RAM, is done automatically. So to speak, after MPU reads DR data, the data in the next DDRAM/CGRAM address is transferred into DR automatically.
● 1/16 Duty
● 12 O"clock View direction
● Negative mode VATN material (Vertical Aligned TN)
● Appearance - blue characters on black background
● Transmissive technology, generally for indoor applications
● Low cost aesthetic alternative to OLED technology
● Chip on board construction (COB) for easy mounting
● On board controller RW1063 or equivalent (HD44780 similar)
● English/Japanese font sets
● 5V logic supply, standard parallel interface
● Display duty 1/16, Driving bias 1/5
● Blue LED backlight
● Preferred view angle - 12 o"clock
● -20 to +70°C wide operating temperature range
● 16 way through hole SIL (top left) connection, 2.54mm pitch
● Overall max dimensions - 80.0 x 36.0 x 13.5mm
● Viewing area - 66.0 x 16.0mm
● 5mm character (actual dimension 3.07 x 6.56mm)